Pimp your Acer Aspire TimelineU Ultrabook!

Hello! Welcome to the 

Acer Aspire TimelineU M5-481TG-6814 Ultrabook

Ram and Hard drive to SSD replacement guide.

Just before we get started please note that taking apart the laptop may void the manufactures warranty and that you do so at your own risk. I am not responsible for your mistakes or clumsiness. There are very small intricate wires and screws so if you don't feel comfortable undertaking this journey then don't. I assume you have experience in this process. I have not included a lot of pictures and demonstrations so this is a basic guideline to show you it is possible, follow it at your own risk. Otherwise lets begin!

I started out purchasing 8 gb of Kingston Ram that can be found here:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820239289

and also the SSD which can be found here:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164

The total price including shipping came out to be: $1,042.47

I found that the laptop didn't have an initial charge, which was fine in this case since I would be taking it apart anyways.

1. To start off; unscrew the sixteen screws found in the back of the laptop. (Please note that the screws are very small and get lost easy, put them in a safe spot.)

2. Once all of the screws are removed, turn the Acer Aspire back over and pull up from the right side by the screen. Move around the keyboard and keep working it loose until it pulls off. There are a few plastic tabs that are holding it in place, located at the back under the screen and front by the touch pad.

Update:

In order to get the back of the keyboard off you need to open the screen after you have the front opened up, which will enable the rest of the keyboard to come up off of the laptop casing. Without opening the screen this will be very difficult to achieve.

*Another note: There are some small connectors that connect the keyboard to the laptop. You will want a small flat screw driver to pop the little tabs up on these cables to remove them so you can completely take the keyboard off.

(click on the pictures to enlarge them)

 3. To the left of the hard drive you can see the ram slot. There is only one slot for the ram, with 2 gigs built in. I installed the 8 gb Kingston ram which was quite simple.

Note: if you are just installing ram and not replacing the hard drive then you do not need to disconnect the keyboard. The picture below shows the keyboard disconnected. The cables have small latches that release them and they pull out nice and easy. If it isn't coming out, you haven't undone the latch.

 4. Next the small board above the battery has to be removed to take out the hard drive. There are two screws holding it down, and a few cables attached to it. Undo those and proceed to the next step.

 5. There are two small screws holding the hard drive down which are found to the right of the laptop. Also the ribbon on top of the hard drive needs to be disconnected from the motherboard. Once that is disconnected, there is a small SATA cable connected to the hard drive that you simply pull out and the hard drive is now free.

6.The small ribbon on top of the hard drive is attached by some stickyness and can be removed. Along with that are two small screws again holding the small metal mount to the hard drive. It bends easy so be careful with it. Make sure you have the right fitting screw driver for these two screws, as they are torqued pretty good and the head will strip if you don't.

 7. Screw down the metal attachment with the two screws and then put the ribbon onto the new hard drive as shown below.

 8. Connect the small SATA cable back into the SSD.

 9. Make sure you plug in the ribbon into the motherboard before sliding the SSD all the way back into place. It will be easier this way as the ribbon doesn't want to bend to that angle other wise. You will know when the ribbon is in place when the small latch lines up with the black line shown in the picture. I don't have the ribbon pushed in far enough as you can see, because there is some space to the black line. Get it as close as you can and push the latch down securing the ribbon into place.

 10. Screw in the two screws that hold the SSD down, and then proceed to put the small board back onto the laptop. The middle cable attaches first, and then the two ribbons.

11. Next plug the keyboard back in. I found this part to be a little tricky because of the small size of the ribbons. There is a small brown ribbon that goes to the left, and a white ribbon that goes to the right, onto that small board we removed earlier. And one other ribbon that connects the keyboard to the motherboard.

Optional:

Hard drive caddy with second SSD for more storage. Never tried to see if these could be set up in a raid or not but it worked great as a cache drive.

 

Once you feel comfortable that the ribbons are in place, simply snap the keyboard back in place and put in the sixteen screws into the back. Now you are ready to start this mean machine up!

Here I am installing Windows 7 Ultimate. It took about 10 minutes or so.

 This final image shows that Windows now sees 10.0 GB of ram. I didn't take a picture of the SSD but it is working like a champ. It takes about 8 to 9 seconds for the Acer Aspire to boot up from cold start.

I hope this has helped you in the process to modding out your new Acer Aspire Ultrabook. Let me know if you have any questions!

Glass Orb

Preston in a tunnel from Ryatyl Productions on Vimeo.

3D hole Finish

3D Hole from Ryatyl Productions on Vimeo.

Final Render

3D hole

3D Hole in floor from Ryatyl Productions on Vimeo.

This was a lot of work and took 2 days to finish but it turned out better than I thought it would!

Max Text

This is some 3d text I put in a shot that I was trying to motion track.

Glass Orb!

Glass Orb Test from Ryatyl Productions on Vimeo.

Mofos on Minis - Unleashed Preview

Mofos on Minis - Unleashed from Ryatyl Productions on Vimeo.

This is a preview for the new Mofos on Minis - Unleashed which we will have on dvd some day!

Doulbe Agent

Double Agent from Tyler Searle on Vimeo.

This is the finished Double Agent movie! Presented by Kotter and Fielding Productions in association with Ryatyl Productions. This movie began when Jared and Kendal got together and wrote a script called Double Agent. Shortly after we started filming in June and completed the film in September. It required a lot of time but everyone enjoyed being a part of it and it turned out to be a big success. Thanks to all those who helped make this film possible! The total running time for this movie is 33 minutes and 15 seconds. So grab some popcorn and enjoy! Please feel free to leave comments and suggestions!


If you would like to donate to Kotter and Fielding Productions or Ryatyl Productions please vist:

kfproductions.blogspot.com/

ryatyl.blogspot.com

--Tyler Searle

Indeo 5.1 Codec Windows Vista

Simply do this:

Open a command prompt (Start -> Run -> type cmd -> [ENTER])

Then execute the command:

regsvr32 ir50_32.dll

That's it. Now WMP can play back Indeo 5 under Vista. The Indeo installer obviously fails to register the dll on Windows Vista...

Happy Viewing!

Salada2k

http://forum.videohelp.com/topic327077.html

On Vista, to register a filter from the command prompt you typically have to be running the command prompt with administrator privileges.

If you have Command Prompt on your Start menu, just right-click and choose Run as administrator. If not, open Windows Explorer, navigate to C:\Windows\System32 and find cmd.exe - right-click and choose Run as administrator.

Now run regsvr32 - it should register filters correctly.
_________________

Car Explosion Test

Double Agent PROMO

This is the most recent update of the Monty python spoof video. Some of the audio clips are just for fun but let me know what you think!

Green Screen Pictures

We set up the green screen on the stage and it turned out that it worked really well. Chroma keying was a breeze, using these greenscreens outside didn't work to well and i wouldn't recommend it unless you have something to keep the screens from blowing all over the place! We tried it outside and it was a nightmare trying to cut out the greenscreen, due to all the folds the wind created and uneven lighting. If you have any questions please leave a comment!

What does Green Screen Do for you? Check this

this short clip shows the advantage of green screen and how you can make an actor appear to be somewhere else that he/she really isn't. Thanks for viewing

Monty finds a port key

King Jacob finds what he thinks is the holy grail but turns out to be a port key that transports him to another place where he meets harry potter.

This is what happens if you talk about Colbys mom! Jake just barely got out of the hospital with minor burns on his face. (jk)

Green Screen

This is a new movie we are starting and we are using some green screen. This video shows some shots from the movie and the actors: Colby Searle and Jacob Bush who are staring in this show.

Patriot!

Don't ask Colby for directions!